Friday, 4 July 2014

 How to Bypass BIOS Passwords

BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if a user forgets their password, or changes the password to intentionally lock out the corporate IT department. Sending the unit back to the manufacturer to have the BIOS reset can be expensive and is usually not covered in the warranty. Never fear, all is not lost. There are a few known backdoors and other tricks of the trade that can be used to bypass or reset the BIOS

DISCLAIMER

This article is intended for IT Professionals and systems administrators with experience servicing computer hardware. It is not intended for home users, hackers, or computer thieves attempting to crack the password on a stolen PC. Please do not attempt any of these procedures if you are unfamiliar with computer hardware, and please use this information responsibly. PAR Forums is not responsible for the use or misuse of this material, including loss of data, damage to hardware, or personal injury.


Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:

Using a manufacturers backdoor password to access the BIOS

Use password cracking software

Reset the CMOS using the jumpers or solder beads.

Removing the CMOS battery for at least 10 minutes

Overloading the keyboard buffer

Using a professional service

Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.


--------------------------------------------------------------------------------

Backdoor passwords

Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.

WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords

Award BIOS backdoor passwords:

ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598

AMI BIOS backdoor passwords:

AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO

PHOENIX BIOS backdoor passwords:

phoenix, PHOENIX, CMOS, BIOS

MISC. COMMON PASSWORDS

ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj

OTHER BIOS PASSWORDS BY MANUFACTURER

Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba

TOSHIBA BIOS

Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot

IBM APTIVA BIOS

Press both mouse buttons repeatedly during the boot


--------------------------------------------------------------------------------

Password cracking software

The following software can be used to either crack or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.

Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS

--------------------------------------------------------------------------------

Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings

Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.


--------------------------------------------------------------------------------

Removing the CMOS Battery

The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.


--------------------------------------------------------------------------------

Overloading the KeyBoard Buffer

On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.


--------------------------------------------------------------------------------

Jumping the Solder Beads on the CMOS

It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.


--------------------------------------------------------------------------------

Using a professional service

If the manufacturer of the laptop or desktop PC can't or won't reset the BIOS password, you still have the option of using a professional service. Password Crackers, Inc., offers a variety of services for desktop and laptop computers for between $100 and $400. For most of these services, you'll need to provide some type of legitimate proof of ownership. This may be difficult if you've acquired the computer second hand or from an online auction.

iPhone & iPad Do Not Show Up in Windows Explorer & My Computer as USB Storage

iPhone & iPad Do Not Show Up in Windows Explorer & My Computer as USB Storage


Update Windows OS – make sure that Windows has all its latest updates and hotfixes.
Sometimes, when plugging in iPhone or iPad to the USB port of computer, the iOS device is not showing up in My Computer or Windows Explorer (File Explorer in Windows 8), even though the iPhone or iPad may already been recognized in Apple iTunes software. Or worse, the iPhone or iPad may not be detected or recognized by the iTunes and the computer.

There are many possible issues that may cause the issues above. Here’s some tricks that you may try to resolve the problems.
  1. Update iTunes – make sure that iTunes software is up-to-date.
  2. Update iPhone or iPad firmware – make sure that the iOS running in iPhone or iPad is of latest version. The availability of new firmware can be checked in Settings -> General -> Software Update.
  3. Restart the iPhone or iPad by pressing and holding down the Sleep/Wake button until a red slider appears, then slide it to power off. Press and hold the same button again for a few seconds to turn on the phone.
  4. Restart the Apple Mobile Device Service (AMDS). To do so, go to Control Panel and open Administrative Tools, then Services (or search for Services). Select Apple Mobile Device and click Stop the service. After the service has stopped, click Start the service.
    Restart Apple Mobile Device Service
  5. Ensure that Apple Mobile Device USB Driver is installed. To check, open the Control Panel, click on Hardware and Sound and then look for Device Manager under Devices and Printers section. Then, expand Universal Serial Bus controllers. Locate the Apple Mobile Device USB Driver in this list. The driver is successfully installed if it is displayed without any downward arrow, “!” or “?” symbols over it.
    If there is a downward arrow, it means that the driver is disabled. To enable this device, right-click its entry in Device Manager and choose Enable from the shortcut menu.
    Enable Apple Mobile Device USB Driver
  6. Restart the PC.
  7. Use the original Apple USB 30-Pin to USB or Lightning to USB cable to connect the mobile device to the computer.
  8. Remove the USB hub if you’re using any to connect between the iDevice and the computer.
  9. Try another USB port.
  10. Unplug and plug in the iDevice into USB port of computer for a few times.
  11. If you’re running iOS 7, iPhone and iPad will ask if you want to trust the computer. Remember to tap on Trust if you see the message been prompted on your iDevice, or else the mobile device will not be connected to the computer.
    iOS Trust This Computer
    Note that if you have iTunes installed and iPhone or iPad is running iOS 7, the iTunes may prompt a message to ask to permission to allow the computer to access the information on the mobile device. Or, it may prompt a error message stating that iTunes could not connect to the iPhone or iPad because it’s locked with a password, and you must enter your password on the iPhone or iPad before it can be used with iTunes. In either cases, do unlock the iPhone or iPad and tap on Trust to allow the mobile device to connect to the PC. Try to disconnect and reconnect the USB cable if you don’t see the prompt for trust relationship.
  12. Update the driver for the iPhone or iPad may also cure the problem that the device does not show up in Windows File Explorer or in iTunes.
    To update the driver for iPhone or iPad, open the Control Panel, click on Hardware and Sound and then look for Device Manager under Devices and Printers section. In Device Manager, look for Apple iPhone or Apple iPad under the ‘Portable Devices’ section. Right-click on it, and select Update Driver Software.
    Apple iPhone in Device Manager
    In the wizard, choose Browse my computer for driver software.
    Update Apple Mobile Device Driver
    Click on Browse and navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers, and then click OK, then Next.
    Update Apple iPhone/iPad Driver
    If you’re seeing a message stating that the best driver is already installed, it means nothing is been done. However, if the message stating that the new driver was installed, try to reconnect the iDevice to see if it turns up in Explorer, My Computer or iTunes.
  13. Repeat the above steps for Apple Mobile Device Driver, especially if Apple Mobile Device Driver is not found or has “!” or “?” symbols on it which indicates there are problem with the driver.
  14. If all the steps above failed to resolve the issues, try to reinstall iTunes. Firstly, go to Control Panel -> Programs and Features to uninstall the following Apple-related applications:
    Apple Application Support
    Apple Mobile Device Support
    Apple Software Update
    Bonjour
    iTunes
    Then, download and install the iTunes.
iPhone in Windows

When everything is working properly, Windows (including Windows Explorer, File Explorer and My Computer) and iTunes should detect the name you given to your iPhone or iPad correctly, instead of just Apple iPhone.

Like us on Facebook

Thursday, 3 July 2014

How to Boot into Safe Mode (F8) in Windows 8 & 8.1

How to Boot into Safe Mode (F8) in Windows 8 & 8.1


Acknowledging the issue, Microsoft designs an automatic failover behavior in Windows 8 that will take you directly to the boot options menu inside the Windows Recovery Environment (WinRE) whenever Windows detects for multiple times that there is a problem that would otherwise keep the PC from loading Windows, or if the PC is unusable in actuality even though the boot has succeeded.The Safe Mode of Windows one of the well known special state of operating system that is effectively a diagnostics mode for Windows. In Safe Mode, Windows OS loads only the bare minimum drivers and services that are required by the operating system. By loading only the minimal set of features, Safe Mode is useful in isolating the root cause and troubleshooting the problem of the Windows operating system, such as faulty device driver, corrupted software, virus infection and malware attack, which may prevent the PC from booting normally, or cause the Windows to be unstable and unusable.

In Windows 7, Windows Vista, Windows XP and earlier versions of Windows OS together with its corresponding Windows Server variants, getting into Safe Mode is pretty easy – simply by pressing the F8 key or Shift + F8 keyboard shortcut while the initial boot up to access an advanced boot options menu to select options such as Safe Mode and “Disable driver signing”. However in Windows 8, the boot process has been improved and fasten due to hardware and software optimization which makes the duration which Windows to read and respond to the F8 keystroke shorten to less than 200 milliseconds. In other words, Windows 8 boot process is too fast for user to press the F8 key in order to interrupt the boot process, and that’s why to many Windows 8 and Windows 8.1 users especially those running on SSD, the F8 function key appears to be no longer work as a way to bring up advanced boot options or entering Safe Mode.
But what if you want to get into the Safe Mode or advanced boot menu to configure other settings manually? Or when the automatic failover solution built by Microsoft does not work (did not go into Safe Mode) as it should? Microsoft has designed several options where you can rely on to enter the Safe Mode reliably. Note that methods listed below are the first step which is required to take in order to boot into boot options menu, from which you have several options available, including going into Safe Mode (details below).
Method 1: Using Windows System Configuration Utility
  1. Bring up the Run dialog box by pressing the Windows + R keys simultaneously.
  2. Type MSConfig.exe and hit Enter to open the System Configuration utility.
    Run MSConfig
  3. Go to the Boot tab and enable the Safe Boot under “Boot options”, then hit the OK button.
    Entering Safe Mode in Windows 8
  4. Follow the onscreen prompt to select Restart to reboot the computer directly into Safe Mode on Windows 8 and Windows 8.1. You may also opt Exit without Restart in order to reboot later to allow you to continue to work on the computer.
    Restart to Safe Mode
If you want to restart into normal full desktop after getting to Safe Mode via method 1, run MSConfig.exe again and uncheck the Safe Mode option in the Boot tab.
Method 2: Press Shift Key While Restarting
In order to instruct Windows to enter Safe Mode, press and hold the Shift key, and click or tap on theRestart command (which can be accessible via Power button on the Charms Bar or Start Screen, or under “Shut down or sign out” of Windows 8 quick access power user menu).
Method 3: Via Advanced Startup of PC Settings
  1. Slide out the Charms Bar, and go to Settings charm, and then click or tap on Change PC settings.
  2. In windows 8, go to General tab. In Windows 8.1, go to Update and recovery tab, thenRecovery tab.
  3. Scroll to the bottom, and hit or tap on Restart now button under “Advanced startup” section to go to the boot options screen and start the normal restart process.
    Windows 8 Advanced Startup
Method 4: Using shutdown Command
Launch a command prompt window, and type the following command:
shutdown /r /o /f /t 00
All of the steps above, with the exception of method 1, will bring you to a Windows 8 boot options menu. Getting to Safe Mode from the advanced boot options menu will require few more steps, as outlined below:
  1. In the boot options menu, choose Troubleshoot.
    Windows 8 Boot Options to Safe Mode
  2. Select Advanced options.
    Windows 8 Boot Options to Safe Mode
Next, go to Windows Startup Settings or just Startup Settings.
Windows 8 Boot Options to Safe Mode
  1. Next, click or tap on Restart.
    Windows 8 Boot Options to Safe Mode
  2. After rebooting, use number or function key to select an option presented on the screen. Among the options available are as below (with Safe Mode options 4, 5 & 6 in italic):
    • F1 or 1 – Enable debugging
    • F2 or 2 – Enable boot logging
    • F3 or 3 – Enable low-resolution video
    • F4 or 4 – Enable Safe Mode
    • F5 or 5 – Enable Safe Mode with Networking
    • F6 or 6 – Enable Safe Mode with Command Prompt
    • F7 or 7 – Disable driver signature enforcement
    • F8 or 8 – Disable early launch anti-malware protection
    • F9 or 9 – Disable automatic restart after failure
    Windows 8 Startup Options
Well, if all the tricks above is not convenient for you, and you simply want the usual F8 method to access the Advanced Boot Options menu where you can select how the Windows would boot, including to Safe Mode, then run the following command in a Command Prompt (Admin):
bcdedit /set {default} bootmenupolicy legacy
After enabling the legacy boot loader, the F8 function key should work as is Windows 7 and earlier OSes to bring out the Advanced Boot Options menu.
Windows 8 Advanced Boot Options
To disable the legacy mode and return to Windows 8 original fast boot loader, use the following command:

bcdedit /set {default} bootmenupolicy standard

Like us on Facebook

Free 1000 Amazon Coins ($10) for Purchasing Any Android Apps

Free 1000 Amazon Coins ($10) for Purchasing Any Android Apps



If you’re having an Android device, you will definitely want to install Amazon Appstore onto your device. Apart from free download of a paid app daily, and constant discount and rebates on apps purchase, now Amazon is also giving away Amazon Coins valued at $10 in monetary term.

Amazon Coins is a virtual currency from Amazon.com which can be used to purchase apps and games for the Kindle and Android from the Amazon Appstore, or for in-app purchase. Amazon normally sells Amazon Coins at up to 10% discount to its face value to promote the use of the virtual currency. In other words, Amazon Coins is just like a cold, hard cash, though it can only be used within Android phone or tablet and Kindle Fire devices with Amazon Appstore, and on Amazon.com.

Find My Friends App for iOS Free Download

Find My Friends App for iOS Free Download


With Find My Friends app, friends who share their location with you appear on a map so you can quickly see where they are and what they’re up to. According to Apple, users can send the request to see a friend’s location through Find My Friends app, and once the friend accepts the request, users can view his or her exact location on a list or on a map.A new service which comes with iCloud is Find My Friends, which allows a user to locate friends and family members who shared their location with the user from iPhone, iPad or iPod touch. The Find My Friends native app has been released on iTunes App Store, though to use the service, users have to upgrade to iOS 5 or later.

Find My Friends

Find My Friends
Find My Friends comes with several useful features such as ability to temporarily share your location with a group of people, ability to control privacy setting by switching off location sharing with the flip of a switch to go off grid (while still on sharing), and parental restrictions that help users manage how your children use Find My Friends.
Find My Friends also works with Contacts and Maps to provide meaning information when locating friends.

Download Find My Friends for free from iTunes App Store.

PayPal Mobile 2.8 for Android Deposit Check Via Scan Image

PayPal Mobile 2.8 for Android Deposit Check Via Scan Image



As the number one of the most trusted brand in online and mobile payments, PayPal has recently released the newest version of its Android app. The latest version of PayPal Android app, version 2.8, has been designed to include a couple of features which have been existing on PayPal for iPhone app, such as ability to add money from check issued in the US simply by scanning the check image with PayPal app, and store application on Android’s removable SD card. The inclusion of check scanning feature means that Android users can now also deposit and transfer the check though their phone.


Features of the PayPal android app includes:
  • Send money as a gift, split the bill or repay to friend for free.
  • Add money to PayPal account by snapping a photo of check.
  • Check balance, withdraw money or view past transactions directly from Android phone.
  • Search the businesses nearby that accept PayPal as payment via PayPal local feature.
  • Supports SD card to improve application performance.
Steps to deposit check through PayPal Android app:
  1. Sign the back of the Check.
  2. Snap a clear photo of front and back directly from Android phone.
  3. Then, enter the Check amount and tap on the “Process Check” button to proceed with the deposit process.
  4. After that, PayPal will verify and send a confirmation to user once completed.
According to PayPal, it may take up to six days to process and clear the deposit and users have to keep the check for at least 15 days.
PayPal Android app is available as a free download at Android market.

The Secret Powers Hidden In Your Android's Accessibility Options

The Secret Powers Hidden In Your Android's Accessibility Options

You can tweak so many things in Android, you probably haven't even bothered opening up the Accessibility settings. Given the name, you'd think those are only features for people with disabilities, but they can actually be useful for anyone.
The Accessibility settings in Android, much like those on the iPhone, have diverse uses. Browse to Settings > System > Accessibility on your Android device and try these tricks.

Zoom Anywhere with Magnification Gestures

The Secret Powers Hidden in Your Android's Accessibility Options
Enable "Magnification Gestures" and Android will zoom in on anything you want (except the keyboard and notifications bar), whether the app allows for it or now. It's easy to implement too. Just triple-tap any part that you want to magnify, and then pan with multiple fingers. Pinching adjusts the zoom level.
There's also a shortcut if you use this feature often, as Google puts it in the app itself:
You can also temporarily magnify what's under your finger by triple tapping and holding. In this magnified state, you can drag your finger to explore different parts of the screen. Lift your finger to return to your previous state.
You can zoom in on your favorite Instagram images with this little trick, for example, since Instagram doesn't allow for regular pinch-to-zoom. And of course, any other app too.

Hang Up with the Power Button

The Secret Powers Hidden in Your Android's Accessibility Options
When your phone rings and you need to quickly cut the call, press the Power button-that's all you'll have to do if you enable "Power button ends call" in your Accessibility settings.
There's nothing more to this one, but the option itself is useful. It's the setting I first enable in any Android phone because I often have my phone in my pocket. If you're in a meeting or busy in any way, you can just cut the call and have it go to voicemail, without ever taking your phone out of the pocket. Plus, it is also useful if your proximity sensor takes a few seconds to register the tap to end a call after talking.

Turn Any Book into an Audiobook

The Secret Powers Hidden in Your Android's Accessibility Options
Google's built-in "Text-to-speech output" option can turn any ebook into an audiobook, says CNET. It won't work with Pocket or even Kindle, but with the Google Play Books app, you can have any book read aloud. The best part? You can customize the voice to how you like it.
Because it's Google's own engine, you can choose from the various voice data options for an accent or language that best suits your preferences. For example, with English, you get options for United States, United Kingdom or India. With Spanish, you can choose between the US or Spain. You can also set the rate of speech, choosing between nine speeds. Tap the "Listen to an example" to get it just how you want it.
Once Text-to-speech output is set up, go to Google Play Books and open your ebook. If you didn't buy it from the Google Play Store, don't worry, you can easily import all your ebooks into Google Play Books. In the app, go to Menu > Settings and enable "Automatically read aloud" to have Google read any book you open.
CNET recommends that you also enable another option:
You'll also want to ensure that "High-quality voice" is turned on as well, otherwise the speech sounds a little too robotic.
Be warned that the "High-quality voice" setting requires you to use data, so only enable it if internet charges or speed aren't a concern.

Get Larger Text System-Wide

The Secret Powers Hidden in Your Android's Accessibility Options
If the font size of your device is not big enough-and it often isn't, especially if you need reading glasses-then Accessibility settings can provide relief. There is an option here to enable "Large text" and it works across the system. So your font is made larger everywhere, thus making it more legible too.

Enable and Disable Accessibility Features with a Shortcut

The Secret Powers Hidden in Your Android's Accessibility Options
While you have all these Accessibility features, you might not want or need to use them all the time. A simple shortcut lets you enable/disable them quickly.
Take, for instance, the Large Text option. You might not want that bigger font all the time, but you can keep it enabled and only switch it on and off as required with this shortcut. Now, the Accessibility shortcut can be activated in two ways: by pressing and holding the power button or by touching and holding two fingers.
Pressing and holding the Power button was a no-go for me, and would be for many people, as it brings up the shutdown menu for Android. When you're touching and holding two fingers, make sure it's on a place where you can't trigger some other action-for example, doing it on the homescreen will probably bring up widget and launcher options.
These accessibility options should help you get more out of your Android without installing anything. There are other options too, like Talkback, but those are made for certain disabilities in a way that they require you to change how you normally use Android.